From 4be70b922c864c682135d5c66743b6b4c6a51c8f Mon Sep 17 00:00:00 2001 From: Nathaniel Graff Date: Thu, 4 Apr 2019 09:59:15 -0700 Subject: Add HiFive Unleashed board files Includes: - design.dts (including nodes for Vera board hardware) - openocd.cfg - settings.mk - README.md Signed-off-by: Nathaniel Graff --- bsp/sifive-hifive-unleashed/openocd.cfg | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 bsp/sifive-hifive-unleashed/openocd.cfg (limited to 'bsp/sifive-hifive-unleashed/openocd.cfg') diff --git a/bsp/sifive-hifive-unleashed/openocd.cfg b/bsp/sifive-hifive-unleashed/openocd.cfg new file mode 100644 index 0000000..7589897 --- /dev/null +++ b/bsp/sifive-hifive-unleashed/openocd.cfg @@ -0,0 +1,24 @@ +adapter_khz 10000 + +interface ftdi +ftdi_device_desc "Dual RS232-HS" +ftdi_vid_pid 0x0403 0x6010 + +ftdi_layout_init 0x0008 0x001b +ftdi_layout_signal nSRST -oe 0x0020 -data 0x0020 + +set _CHIPNAME riscv +jtag newtap $_CHIPNAME cpu -irlen 5 + +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME riscv -chain-position $_TARGETNAME -rtos riscv +$_TARGETNAME configure -work-area-phys 0x80000000 -work-area-size 10000 -work-area-backup 1 + +flash bank onboard_spi_flash fespi 0x20000000 0 0 0 $_TARGETNAME 0x10040000 +init +halt + +# Uncomment this if you want to be able to clobber your SPI Flash, which +# probably you don't since you can do it through Linux + +# flash protect 0 0 last off -- cgit v1.2.3